Canon R6 Mark II Camera Repair

Common Repairs On The Canon R6 Mark II

• Goes Into Error: “An Error Prevented Shooting. Turn The Camera Off and On Again or Re-Install The Battery.”
• Err 10, Err 20, Err 30, Err 40, Err 50, Err 60, Error 70, or Error 80, Error 99 will display on the LCD Screen.
• Error 01, Err 01 “Communications Between The Camera and Lens is Faulty. Clean The Lens Contacts.”
• Error 02, Err 02 “Card (1 or 2) Cannot Be Accessed. Reinsert/change Card or Format Card (1 or 2) With Camera.”
• Error 04, Err 04 “Cannot Save Images Because Card (1 or 2) Is Full. Replace Card (1 or 2).”
• Error 06. Err 06 “Sensor Cleaning Is Not Possible. Turn The Camera Off And On Again.”

• Controls, Knobs or Buttons Not Working or Are Intermittent
• HDMI or USB Looses Connection Or Doesn’t Work, No HDMI or USB Output
• Spots of Debris on Sensor.
• Lens Mount is Loose.
• Microphone Port Connector Not Working
• SD Memory Card Reader Doesn’t Work or Card Doesn’t Lock in or Stay in the Slot. Card Reader Pins May Be Bent.
• LCD Screen Is Cracked Or Broken, LCD Screen Replacement.
• Power problems, Camera Not Powering On, Dead.
• Camera Has suffered impact damage. Was dropped or jarred. May Have Physical Damage or May Simply Not Work Properly.
• Water, Liquid, or Moisture Damage.