Sony FS7 II Camera Repair

Common Repairs On The Sony FS7 II

• LCD monitor is losing connection to camcorder. Wiggling connection seems to effect the connection, or moving the monitor slightly, will cause picture to flicker like a bad connection. No picture on viewfinder.
• The glass that covers the CMOS sensor, on the front of the camcorder, may be scratched or marked. This can cause artifacts in the recorded footage.
• Sensor is dirty, there is debris or dirt in the sensor or ND filters. You may notice spotting when recording.
• The battery is stuck on the camcorder and will not come off easily or the battery is not staying on the camcorder and it will not lock into place. The battery release may not be working properly.Camera Error. Turn Power Off Then On.
• Power problems, Not Turning On, Dead Won’t Come On, or Doesn’t Fully Power Up, LCD Black Screen.
• Lens Mount is Loose.

• Fan Stopped Error Warning Message
• HDMI Looses Connection Or Doesn’t Work, No HDMI Output.
• Lens is not communicating with the body of the camcorder. Both auto focus and manual focus may not be working correctly. You may also not be able to adjust the iris or control the F stop. Lens not zooming in or out. These problems can be intermittent. The contact strip with the gold pins on the front of the camcorder may look damaged, such as bent pins, or maybe pushed in.
• LCD Screen Is Cracked Or Scratched, LCD Screen Replacement.
•  SDI ports not working, intermittent output signal or connection issues.
• Camera Has suffered impact damage. Was dropped or jarred. May Have Physical Damage or May Simply Not Work Properly.
• Water, Liquid, or Moisture Damage.